Instruction manual ROSCOPE i2000 App Android & iOS 19.09.
Bedienungsanleitung ROSCOPE i2000 App Content: How do I install an Update on the ROSCOPE? (Page 3) How do I establish a connection between an Android device and the ROSCOPE i2000? (Page 5) How do I establish a connection between an iPad/iPhone and the ROSCOPE i2000? What do I have to consider during the change from Android to iOS or backwards? 19.09.
How do I install an Update on the ROSCOPE? Download the update from the ROTHENBERGER Homepage: http://www.rothenberger.com/en/service/technical-downloads/software Take the SD-Card out of the ROSCOPE i2000 and load the update on the SD-Card: Open folder „DCMI“ Open folder „RO2KLOAD“ Insert the update „RO2KUPDT.bin“ 19.09.
How do I install an Update on the ROSCOPE? Insert the SD-Card again into the ROSCOPE Switch-on the ROSCOPE press -button to confirm Update is loading, please wait Attention: Do not switch-off the ROSCOPE! Depending on the version a blue status bar appears Update is completed, restart the ROSCOPE 19.09.
How do I establish a Connection between an Android Device and the ROSCOPE i2000? At first a Hotspot needs to be established with the Android device Open sub item „Tethering and portable hotspots“ Activate portable hotspot Chose “Portable Wi-Fi hotspot Click “configure” to get into the hotspot settings For this follow „More settings“ under „Settings “ 19.09.2014 The menu navigation can deviate from other Android devices.
How do I establish a Connection between an Android Device and the ROSCOPE i2000? Select settings Select Wi-Fi-hotspot Hotspot Roscope 192.168.4.154 RO-GUEST RO-WIFI RO-Mobile Hotspot Roscope Select Wi-Fi-options If secured! Insert password Hotspot Roscope _ 19.09.
How do I establish a Connection between an Android Device and the ROSCOPE i2000? Start ROSCOPE App Type in the IP address of the ROSCOPE Select Liveimage Hotspot Roscope 192.168.4.154 RO-GUEST RO-WIFI RO-Mobile Hotspot Roscope 19.09.
How do I establish a Connection between an Android Device and the ROSCOPE i2000? Acknowledge input Hotspot Roscope 192.168.4.154 RO-GUEST RO-WIFI RO-Mobile X2 Hotspot Roscope Connection established 19.09.2014 Ist die Verbindung einmal hergestellt, muss bei der nächsten Benutzung lediglich sichergestellt sein, dass der Hotspot aktiv ist und die ROSCOPE eingeschaltet ist.
How do I establish a Connection between an iPad/iPhone and the ROSCOPE i2000? Switch on the ROSCOPE i2000 Select „ROTK…“ in Do the following settings: your Wi-Fi settings Check in the menu of the ROSCOPE i2000 weather the Wi-Fi is turned on 1 Ad-Hoc 192.168.10.240 2 3 19.09.
How do I establish a Connection between an iPad/iPhone and the ROSCOPE i2000? Once the Wi-Fi Connection is established close the ROSCOPE i2000 App To close the App push the home button twice and slide the ROSCOPE i2000 App to the top of the screen (see picture) Now lock the iPad/iPhone and start the ROSCOPE i2000 Unlock the iPad/iPhone and start the App again The Live-Image is now available 19.09.
How do I establish a Connection between an iPad/iPhone and the ROSCOPE i2000? Please consider: The establishing of the Wi-Fi connection is only required bevor the first use of the App. The next time you want to use the App do the following 3 steps: Turn on the ROSCOPE i2000 Unlock the iPad/iPhone Start the App After the use of the App close it like on the previous page explained 19.09.
How do I establish a Connection between an iPad/iPhone and the ROSCOPE i2000? Changeover from iOS to Android: Choose the Hotspot in the Wi-Fi-settings (see page 6 step 3) Leave the Wi-Fi-Settings (see page 8 step 9) and change into the Live-Image Changeover from Android to iOS: Change the Wi-Fi-settings into AD-HOC (see page 9 step 1) Change into the Live-Image (see page 8 step 9) Turn off the ROSCOPE Turn on the ROSCOPE Check if the settings are still saved Open the App The Live-Image i
