Info Sheet

SPECIFICATIONS
STEREO INTEGRATED AMPLIFIER
X5
All specifications are accurate at the time of printing.
Michi reserves the right to make improvements without notice.
600 watts/channel (4 ohms)
350 watts/channel (8 ohms)
< 0.009%
< 0.03%
20 Hz-20k Hz (+0 dB, -0.2 dB)
10 Hz-100k Hz (+0 dB, -0.6 dB)
350
5.7 mV / 47k ohms
570 uV/ 100 ohms
380 mV / 100k ohms
580 mV / 100k ohms
197 mV
19 mV
12.5 V
12.5 V
1 V / 470 ohms
±10 dB at 100 Hz
±10 dB at 10k Hz
80 dB
102 dB
> 65 dB
> 65 dB
Maximum Power Output
Continuous Power Output
Total Harmonic Distortion
Intermodulation Distortion
(60 Hz : 7 kHz, 4:1)
Frequency Response
Phono Input
Line Level Inputs
Damping Factor
(20 Hz - 20kHz, 8 ohms)
Input Sensitivity /
Impedance
Phono Input (MM)
Phono Input (MC)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Input Overload
Phono Input (MM)
Phono Input (MC)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Preamplifier Output Level /
Impedance
Tone Controls
Bass
Treble
Signal to Noise Ratio
(IHF “A” weighted)
Phono Input (MM/MC)
Line Level Inputs
Channel Separation
Phono Input (MM)
Line Level Inputs
Digital Section
Frequency Response
Signal to Noise Ratio
(IHF “A” weighted)
Input Sensitivity/Impedance
Preamplifier Output Level
Coaxial/Optical Digital Signals
PC-USB
Power Requirements
Europe
USA
Power Consumption
Standby Power Consumption
Normal
Network Wakeup
BTU (4 ohms, 1/8 power)
Dimensions (W x H x D)
Front Panel Height
Weight (net)
Finish
20 Hz - 20k Hz (0 ± 0.4 dB)
102 dB
0 dBFs / 75 ohms
1.2 V (at -20 dB Volume Position)
SPDIF LPCM (up to 192kHz 24 bit)
USB Audio Class 1.0
(up to 96kHz 24-bit)
USB Audio Class 2.0
(up to 384kHz 32-bit)*
*Driver installation required
MQA, DSD and DoP support
230 V, 50 Hz
120 V, 60 Hz
850 watts
< 0.5 watts
< 2 watts
2194 BTU/h
485 x 195 x 452 mm
19" x 7 5/8" x 17 3/4"
177 mm / 7"
43.8 kg, 96.56 lb
Black