Info Sheet

Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]
www.rotel.com
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
The RX-1052 conclusively proves that “stereo” is very much a part of today’s world where both music and movies provide
enriching entertainment for the entire family. The RX-1052 doesn’t limit itself to one room either. In fact, the RX-1052’s
unique combination of capabilities means you can enjoy your music and video sources in many different areas of your
home: the den, beside the pool, in the kitchen, or simply relaxing in the living room.
Audio
Continuous Amplier Power
100 watts/channel
(20-20k Hz, <0.05%THD, 8 ohms)
Total Harmonic Distortion
<0.05% at rated power
Intermodulation Distortion
(60 Hz:7 kHz)
<0.05% at rated power
Frequency Response
Line Level: 10 Hz - 70 kHz, ±3 dB
Phono: 20 Hz - 20 kHz, ±1 dB
Signal to Noise Ratio (IHF “A”
weighted)
Line Level: 92 dB
Phono: 74 dB
Input Overload
Line Inputs: 5 V
Phono Inputs: >120mV
Preamplier Output Voltage
1.0 V (160 mV Input)
Input Sensitivity/Impedance
Line Level: 160 mV/47 kohms
Phono: 2.5 mV / 47 kohms
Tone Controls (Bass/Treble)
±8 dB at 100 Hz/10 kHz
Video
Frequency Response
3 Hz-10 MHz, ± 3 dB
Signal to Noise Ratio
45 dB
Input Impedance
75 ohms
Output Impedance
75 ohms
Output Level
1 volt
FM Tuner
Usable Sensitivity
14.2 dBf
50dB Quieting Sensitivity
20.2 dBf (mono) /
45.3 dBf (stereo)
Signal to Noise Ratio (at 65 dBf)
70 dBf (mono) /
65 dBf (stereo)
Harmonic Distortion (at 65 dBf)
0.3% (mono) / 0.5% (stereo)
Frequency Response
30 Hz-14 kHz, ±1.5 dB
Capture Ratio
2.0 dB
FM Tuner––Cont.
Alternate channel Selectivity
47 dB (±400 kHz)
Spurious Response Ratio
80 dB
Image Response Ratio
65 dB
IF Response Ratio
80 dB
AM Suppression Ratio
52 dB
Stereo Separation
(100HZ/1 kHz/10 kHz):
40dB / 45 dB / 35dB
Output level
1.0 V
Antenna Input
75 ohms unbalanced
AM Tuner
Sensitivity
500 μV/m
Image Response Ratio
35 dB
AM Tuner––Cont.
Signal to Noise Ratio
40 dB
Output level
250 mV
Antenna Input
Loop Antenna
General
Power Consumption
300 watts
28.4 watts (idle)
13.2 watts (standby)
Power Requirements (AC)
115 volts, 60 Hz (USA version)
230 volts, 50 Hz (European version)
Weight
10.8 Kg / 30.4 lbs.
Dimensions (W x H x D)
432 x 121 x 359 mm
17 x 4
3
/
4
x 14
1
/
8
"
Front Panel Height
(feet removed/for rack mount)
109 mm / 4.3"
RX 1052
Stereo Receiver with Multi-zone / Multi-source
Description
Specications