RS232 Protocol

5
Table 2 - Type 14 Main Zone Commands
NOTE: These commands are duplicate functions of the primary commands in the table above
bearing the same name, but are discrete for the main zone only. For multi-zone installation
applications, it is recommended that the below commands be used where applicable rather than
the type 10 commands to avoid zone conflicts.
RSX-1058 HEX Command Description
MAIN ZONE POWER & VOLUME COMMANDS
FE 03 C8 14 0A E9 Main Zone Power Toggle
FE 03 C8 14 4A 29 Main Zone Power Off
FE 03 C8 14 4B 2A Main Zone Power On
FE 03 C8 14 00 DF Main Zone Volume Up
FE 03 C8 14 01 E0 Main Zone Volume Down
FE 03 C8 14 1E FD 00 Main Zone Mute Toggle
FE 03 C8 14 6C 4B Main Zone Mute On
FE 03 C8 14 6D 4C Main Zone Mute Off
MAIN ZONE SOURCE SELECTION COMMANDS
FE 03 C8 14 02 E1 Main Zone Source CD
FE 03 C8 14 03 E2 Main Zone Source Tuner
FE 03 C8 14 04 E3 Main Zone Source Tape
FE 03 C8 14 05 E4 Main Zone Source Video 1
FE 03 C8 14 06 E5 Main Zone Source Video 2
FE 03 C8 14 07 E6 Main Zone Source Video 3
FE 03 C8 14 08 E7 Main Zone Source Video 4
FE 03 C8 14 09 E8 Main Zone Source Video 5
Table 3 - Type 15 Record Source Commands
RSX-1058 HEX Command Description
RECORD SOURCE SELECTION COMMANDS
FE 03 C8 15 02 E2 Record Source CD
FE 03 C8 15 03 E3 Record Source Tuner
FE 03 C8 15 04 E4 Record Source Tape
FE 03 C8 15 05 E5 Record Source Video 1
FE 03 C8 15 06 E6 Record Source Video 2
FE 03 C8 15 07 E7 Record Source Video 3
FE 03 C8 15 08 E8 Record Source Video 4
FE 03 C8 15 09 E9 Record Source Video 5
FE 03 C8 15 6B 4B Record Follow Main Zone Source