Owner's Manual

17
English
“Made for iPod,” and “Made for iPhone,” means that an electronic accessory
has been designed to connect specically to iPod or iPhone, respectively, and
has been certied by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory
with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
Specications
Total Harmonic Distortion (20 Hz - 20k Hz) < 0.002%
Input Sensitivity / Impedance
Phono Input (MM) 2.5 mV / 47k ohms
Line Level Inputs (RCA) 150 mV / 100k ohms
Line Level Inputs (XLR) 250 mV / 100k ohms
Output Level
Line Level (RCA) 1 V
Balanced (XLR) 2 V
Frequency Response:
Phono Input 20 Hz - 20k Hz, 0 ± 0.2 dB
Line Level Inputs 10 Hz - 100k Hz, 0 ± 0.1 dB
Signal to Noise Ratio (A weighting)
Phono Input 80 dB
Line Level Inputs 112 dB
Channel Separation
Phono Input > 75 dB
Line Level Inputs > 75 dB
Digital Section
Frequency Response 20Hz - 20kHz (±0.5 dB, Max)
Signal to Noise Ratio (A weighting) 108 dB
Digital Inputs SPDIF LPCM
(up to 192kHz 24 bit)
PC-USB USB Audio Class 1.0
(up to 96kHz 24 bit)
USB Audio Class 2.0
(up to 384kHz 32bit)*
*Driver installation required
General
Power Requirements:
USA: 120 Volts, 60 Hz
EC: 230 Volts, 50 Hz
Power Consumption 45 watts
Standby Power Consumption < 0.5 watts
BTU 78 BTU/h
Dimensions (W x H x D) 431 x 144 x 348 mm
(17 x 5
11
/
16
x 13
7
/
9
ins)
Front Panel Height 3U (132.6 mm, 5
1
/
4
ins)
Weight (net) 9.2 kg, 20.28 lbs.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel Hi-Fi logo are registered trademarks of The Rotel Co., Ltd, Tokyo,
Japan.