Info Sheet

RMB-1506

6 x 50 Watts of

robust power

12 volt trigger input

www.rotel.com

Class AB amplifier

design

6-Channel Custom Installation Amplifier

This amplifier is perfect for less elaborate multizone audio

systems and can be mated with any of our surround receivers

or our preamp/processor to add music throughout three

additional living areas or “zones” of your home. You can also

add another RMB-1506 for larger multizone applications that

don’t need the power output of the RMB-1512. As with all Rotel

multichannel amplifiers it includes all of the most wanted

custom installation features.

Automatic signal

sensing

*Note – all Rotel 15 series components may be rack mounted

and remotely controlled via RS-232, IR, or 12 volt (depending on

model) for complete stealth operation.

PAGE 1
RMB-1506 6-Channel Custom Installation Amplifier Class AB amplifier design Automatic signal sensing This amplifier is perfect for less elaborate multizone audio systems and can be mated with any of our surround receivers or our preamp/processor to add music throughout three additional living areas or “zones” of your home. You can also add another RMB-1506 for larger multizone applications that don’t need the power output of the RMB-1512.
PAGE 2
RMB-1506 6-Channel Custom Installation Amplifier SPECIFICATIONS Continuous Power Output 6 x 50 watts/channel all channels driven (into 8 ohms, 20-20k Hz, < 0.03% THD) Continuous Power Output into 4 ohms 6 x 80 watts/channel all channels driven (DIN 1 kHz,1.0% THD) Speaker Impedance 4 ohms minimum Auto Turn On Level 1 mV input signal (with all inputs) Power Requirements Total Harmonic Distortion USA 120 Volts, 60 Hz (20Hz-20kHz, 8 ohms) Europe 230 Volts, 50 Hz Continuous rated power: < 0.