Info Sheet

FOUR CHANNEL POWER AMPLIFIER
RMB-1504
www.rotel.com
The RMB-1504 Class AB 4-channel amplier delivers 70 watts
per channel into 8 ohms and 115 watts into 4 ohm loads with
the ongoing commitment of performance without compromise
building on over 55 years of Rotel amplier engineering, design
and manufacturing experience. This amplier provides power
and renement for object based overhead speakers in home
theater installations and the demanding drive required for
custom installation and multi-room audio solutions.
The 12 volt trigger input and output connections, user
selected audio signal sense power control, front panel volume
attenuators, audio output link connections, 5-way speaker
binding posts and available rack mount kit provides ultimate
installation exibility.
12 volt trigger
input
Automatic signal
sensing
4 x 70 Watts of
robust power
Class AB amplier
design
An oversized factory built toroidal transformer and
high eiciency capacitors drive an array of high current
output transistors ensuring fast transient timing,
accurate detail and controlled consistency of low
frequency regardless of the loudspeakers load rating
or cable run distance. Maintaining crucial timing and
energy while delivering eortless power is a signature
trait of this amplier providing increased speaker
placement options.
Critical evaluation of the circuit design and meticulous
selection of each acoustic audio components ensures
accuracy, power and eiciency all coupled with an
unsurpassed build quality ensuring this amplier
proudly wears the Rotel name.