RMB-1077 Seven Channel Power Amplifier Important Safety Information WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, be sure that the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not allow foreign objects to get into the enclosure.
English
English 5 Contents About Rotel Important Safety Information .................. 2 Figure 1: Controls and Connections 3 Figure 2: Input and Output Connections 4 About Rotel ............................................ 5 Getting Started ....................................... 5 Operating Features 5 A Few Precautions 5 Placement 5 AC Power and Control .............................
RMB-1077 Seven Channel Power Amplifier AC Power and Control AC Power Input 8 The RMB-1077 is supplied with the proper AC power cord. Use only this cord or an exact equivalent. Do not use an extension cord. A heavy duty multi-tap power outlet strip may be used, but only if it is rated to handle the current demand of the RMB-1077. Be sure the Power Switch on the front panel of the RMB-1077 is turned off. Then, plug one end of the cord into the AC power connector 8 on the back panel of the amplifier.
English 7 Input Signal Connections 4 See Figure 2 The RMB-1077 has standard unbalanced RCA-type input connectors, the type used on nearly all audio equipment. There is an RCA input for each of the seven amplifier channels. These RCA inputs accept audio signals from preamplifiers or surround sound processors. Use high quality audio interconnect cables for best performance. Speakers The RMB-1077 has seven sets of speaker connection terminals, one for each amplifier channel.
RMB-1077 Seven Channel Power Amplifier Troubleshooting Most difficulties in audio systems are the result of poor or wrong connections, or improper control settings. If you encounter problems, isolate the area of the difficulty, check the control settings, determine the cause of the fault and make the necessary changes. If you are unable to get sound from the RMB-1077, refer to the suggestions for the following conditions: Front Panel Power Indicator Is Not Lit No main power to the RMB-1077.
The Rotel Co. Ltd. 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310 Rotel of America 54 Concord Street North Reading, MA 01864-2699 USA Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: +44 (0)1903 221 600 Fax: +44 (0)1903 221 525 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf. Germany Phone: +49 05201-87170 Fax: +49 05201-73370 www.rotel.
