Info Sheet

Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]
www.rotel.com
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
Rotel’s Class D ampliers are technological marvels utilizing the latest circuit advances to deliver critically acclaimed
performance. The RMB-1076 is a case in point. A space saving, cool-running and remarkably efcient design, the RMB-1076
is a real powerhouse, with 6 by 100 watts per channel of audiophile quality power into 8 ohms,
all channels driven, at vanishingly low distortion.
The RMB-1076 is the ideal amplier for high quality custom installations. In an elegant package less than 3“ high, it will t
where large conventional ampliers won’t, and because it produces so little heat, it won’t compromise other components
located in the same space. Its sophisticated power supply and output stages are rock solid even with power uctuations
and complex speaker loads. With custom features like level trims, input bussing, RCA output link for daisy chaining and
signal sense and 12 volt trigger turn-on, the RMB-1076 is easy to integrate. Best of all, its musical performance is simply
outstanding.
RMB 1076
Class D Power Amplier
Description
Specications
Power Congurations: 6 x 100 watts
Watts/Channel: 100 watts, all channels
driven, with 20kHz lter
unbridged, 8 ohm, 20 to
20kHz, < 0.2%THD
THD, all rated power, 20-20,000Hz: < 0.2%
IM Distortion, all rated power, 60Hz : 7kHz, 4:1: < 0.03%
Power Output, 4 ohms, 1:0% THD: 180 watts
Frequency Response ±3dB: 10Hz - 40kHz
Damping Factor (8 ohms): 200
S/N Ratio (IHF A network): 105dB
Amp Gain: 27.2dB
Input Sens. / Impedance: 1.25V / 8.2kohms
Auto Turn On Threshold Level
(if activated): 10mV input signal
Power Requirements: USA: 120 Volts, 60Hz,
Europe: 230 Volts, 50Hz
Power Consumption: 300 watts
Output Peak Current: 11A
Idling Power Consumption: 70 watts
Standby Power Consumption: 6 watts
Dimensions (W x H x D): 432 x 72 x 382 mm, 17 1/8 x
2 7/8 x 15 1/8 in
Front Panel Height: 60 mm, 2 3/8 in
Weight (net): 5.7 kg, 12.5 lbs