Info Sheet

Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]
www.rotel.com
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
The RMB-1066 multi-channel power amplier is an enormously exible unit intended primarily for use in surround systems and
home audio distribution. The power supply and output circuits are congured for exceptional reserve capability and stability. In
six channel mode, the RMB-1066 delivers 60 watts RMS each (20 Hz to 20 kHz @ 0.03% THD into 8 ohms). In ve channel
mode (one channel quiescent), power increases to 70 watts RMS, each measured by the same demanding standards. Amplier
pairs can be bridged to develop 150 watts x 3 for almost half a kilowatt of output power. Three rear panel switches (one two-way
and two three-way) make bridging easy and also link the inputs via internal “daisy chain” connections with a single source, thus
simplifying system wiring. Buffered line level outputs allow multiple ampliers to “daisy chain” from a single source. Input level
controls, strategically placed between front panel heat sink ns and an extensive 6 LED indicator array ease system adjustment
and monitoring. 12 volt trigger operation and a detachable IEC power cord directly address demanding custom installation
requirements while custom brass speaker terminals provide full contact power transfer.
Power Congurations: 6 x 60 watts
Watts/Channel
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,
0.06% THD
60 watts
THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel
0.03%, maximum
0.03%, maximum
0.05%, maximum
IM Distortion (at rated ower, 60Hz:7kHz = 4:1) 0.03%, maximum
Damping Factor (8 ohms) 150
Input Sens. / Impedance 1.5V / 22 kohms
Frequency Response 15-100 kHz (±1dB)
S/N Ratio (IHF A) 116dB
Power Consumption 700 watts
Dimensions (W x H x D) 433 x 121 x 428 mm
17
1
/
8
x 4
3
/
4
x 16
7
/
8
"
Front Panel Height
109mm, 4.3"
Weight (net) 11.8 kg / 26 lbs
RMB 1066
High Current Six Channel Amplier
Description
Specications