Owners Manual

31
c) Select the Default Source:
Select the source component that you want to begin playing
when the alarm goes off. Press the HOUR button to select the
TUNER. Press the MINUTE button to select the CD (make sure
there is a disc in the player). When finished, press the MODE
button to record your changes and advance to the next step.
TUNER
CD
MODE
HOUR
MIN
PM
ALARM
RECEIVE
d) Setting Clock Time:
The display will show the current time of day. Use the HOUR and
MINUTE buttons to make any changes.
Make sure that the PM
indicator shows the correct 12 hour period.
When finished, press
the MODE button to record changes and exit the Set-Up mode.
HOUR
BUTTON
MINUTE
BUTTON
MODE
HOUR
MIN
PM
ALARM
RECEIVE
Note 1:
The clocks in different zones may be slightly out of synch due to
drift or inaccurate setting. They will be re-synchronized auto-
matically with the master system clock in Zone A at 12 noon
each day .
Note 2:
If a RSM-901 is set as a SLAVE (see Page 13), only the clock can
be set. Only one alarm in each zone is permitted and it must be
set from the MASTER RSM-901 in each zone.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
For Assistance
We hope this manual has been of assistance in planning and in-
stalling your multi-room sound distribution system. Although
we’ve gone to great lengths to make this as complete as pos-
sible, we’re sure we haven’t covered every aspect of every pos-
sible system installation. Please feel free to contact our
Technical Support department if you have any questions.
Rotel of America
54 Concord Street
North Reading, MA 01864-2699
Phone: [phone]
Fax: [phone]
In addition, your local Rotel Authorized retailer is an invaluable
source of information and assistance, particularly in the area of
custom audio systems.
Thank you very much for purchasing a Rotel system.
OPERATING INSTRUCTIONS