Owner`s manual

22
RCX-1500 Stereo Compact Disc Receiver
Specifications
[Amplifier section]
Continuous Power Output (20-20khz,<0.3%,8 ohms) 2x100 watts
Total Harmonic Distortiion
(20-20khz,8 ohms) <0.2%
IM Distortion
(at rated power 60Hz:7kHz=4:1) 63 dBf (mono)
Input Sens. / Impedance (AUX2) 200mV / 47 Kohms
Input Overload Level (AUX2) 2.5V
Frequency Response (AUX2) 10 - 40 kHZ (±3db )
S/N Ratio (IHF A) ( AUX2) 92 dB
[PREOUT section]
Output level/Impedance (AUX2) 1 V / 1K ohm
Total Harmonic Distortion 0.006%
Frequency Response (AUX2) 10 - 110 kHZ (±3db )
S/N Ratio (IHF A) ( AUX2) 90 dB
[FM Tuner section]
Usable Sensitivity 22.2dBf
50dB Quieting Sensitivity 27.2dBf
Signal to Noise Ratio (at 65 dBf) 63 dBf (mono), 60 dBf (stereo)
Harmonic Distortion (at 65 dBf) 0.2% (mono), 0.3% (stereo)
Frequency Response 10 Hz-15kHz, ±3dB
Stereo Separation
(100Hz/1kHz/10kHz) 40dB/45dB/35dB
Output level
(at 75KHz ) 1.1V (at Volume 82)
Antenna Input 75 ohms unbalanced
[DAB Tuner section]
Sensitivity -80dBm
Tuning Range Band III (174-240MHz)
Audio Data Rate 224Kbps (Max)
Frequency Response 20 - 20KHz (± 1.0dB )
Output level
(at 0dBfs ) 1.1V (at Volume 82)
Antenna Input 75 ohms F connector
[CD Section]
Total Harmonic Distortion
(at 0dBfs ) 0.0045% at 1KHz
Frequency Response 20 - 20KHz (± 0.5 dB )
Channel Balance ± 0.5 dB
Phase Linearity ± 0.5 degree
Channel Separation 90dB at 1KHz
Signal to Noise Ratio 100dB
Dynamic Range 96dB
Digital to Analog Converters Wolfson
Output Level
(at 0dB ) 2.2V (at Volume 82)
[General section]
Network connection 802.11b/g
Security WEP, WPA1 (TKIP)
WPA2 (TKIP)
File formats Real Audio, MP3, Windows
media stream, OGG
vorbis,AAC, WAV, AIFF and
AU.
Power consumption 140 watts
Power Requirements (AC) 120V, 60Hz(USA)
230V, 50Hz(Europe)
Weight (net) 8.1 kgs
Dimensions (W x H x D) 391 x 144 x 343 mm
(17
1/4 x 35/8 x 13”)
Front panel height 132.6 mm, (5
1/4”)
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co., Ltd.
Tokyo, Japan.
“ Made for iPod” means that an electronic accessory has been designed to
connect specifically to iPod and has been certified by the developer to meet
Apple performance standards.
“Made for iPhone” means that an electronic accessory has been designed
to connect specifically to iPhone and has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
iPhone is a trademark of Apple Inc.
Windows, Windows XP, Windows 2000, Windows Vista, Windows
7, Windows Media are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
“This product includes technology owned by Microsoft Corporation and
under a licence from Microsoft Licensing GP. Use or distribution of such
technology outside of this product is prohibited without a license from
Microsoft Corporation and/or Microsoft Licensing, GP as applicable.”