Protocol

4
RA-1592 ASCII Command Description Unit Response
bass_000! Set Bass to 0 bass=000!
bass_+10! Set Bass to +10 bass=+10!
treble_up! Treble Up treble=000/+##/-##!
treble_down! Treble Down treble=000/+##/-##!
treble_-10! Set Treble to -10 treble=-10!
treble_000! Set Treble to 0 treble=000!
treble_+10! Set Treble to +10 treble=+10!
BALANCE CONTROL COMMANDS
balance_right! Balance Right balance=000/L##/R##!
balance_left! Balance Left balance=000/L##/R##!
balance_L15! Set Balance to Max Left balance=L15!
balance_000! Set Balance to 0 balance=000!
balance_R15! Set Balance to Max Right balance=R15!
SPEAKER OUTPUT COMMANDS
speaker_a! Toggle Speaker A Output speaker=a/a_b/off!
speaker_b! Toggle Speaker B Output speaker=b/a_b/off!
OTHER COMMANDS
dimmer! Toggle display dimmer dimmer_#!
dimmer_0! Set display to brightest setting n/a
dimmer_1! Set display to dimmer level 1 n/a
dimmer_2! Set display to dimmer level 2 n/a
dimmer_3! Set display to dimmer level 3 n/a
dimmer_4! Set display to dimmer level 4 n/a
dimmer_5! Set display to dimmer level 5 n/a
dimmer_6! Set display to dimmest setting n/a
power_mode_quick! Set power mode to quick power_mode=quick!
power_mode_normal! Set power mode to normal power_mode=normal!
pcusb_class_1! Set PC-USB Audio Class to 1.0 pcusb_class=1!
pcusb_class_2! Set PC-USB Audio Class to 2.0 pcusb_class=2!
factory_default_on! Reset unit to factory defaults n/a
DISPLAY REFRESH COMMANDS
display_update_auto! Set Display Update to Auto display_update=auto!
display_update_manual! Set Display Update to Manual display_update=manual!
Section 2: Feedback Request Command List
Command: get_display!
Description: Request the entire display to be sent
Return String: display=###,text
Return Description:
Current display data; must include 3 digit length of text string at beginning
followed by "," and text string (no terminating character)
Example: display=040, Sample Text