Specification Sheet

SPECIFICATIONS
www.rotel.com
CUSTOM INSTALLATION AMPLIFIER
C8+
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Maximum Power Output 150 watts/ch
(8 channels driven, 4 ohms)
Continuous Power Output 100 watts/ch
(8 channels driven, 8 ohms)
Bridged Power Output 300 watts/ch
(4 channels driven, 4 ohms)
Total Harmonic Distortion < 0.1%
Intermodulation Distortion < 0.1%
(60 Hz : 7kHz, 4:1)
Frequency Response
Line Level Inputs 10 Hz - 100k Hz, 0 ± 0.5 dB
Tone Controls
Bass ± 10 dB at 100 Hz
Treble ± 10 dB at 10k Hz
Damping Factor 80
(20 Hz - 20 kHz, 8 ohms)
Input Sensitivity / Impedance
Line Level Inputs (RCA) 0.43 V / 31k ohms
Input Overload
Line Level Inputs (RCA) 2.8 V
Signal to Noise Ratio
(IHF A-weighted)
Line Level Inputs 100 dB
Crosstalk/Separation > 50 dB
Digital to Analog Converters Texas Instruments
Digital Section
Frequency Response 10 Hz - 20k Hz (0 ± 0.5 dB)
Signal to Noise Ratio (IHF A-weighted) 102 dB
Input Sensitivity/Impedance 0 dBfs / 75 ohms
Coaxial/Optical Digital Signals SPDIF LPCM
(up to 24-bit / 192k Hz)
Power Requirements
USA 120 V, 60 Hz
EC 230 V, 50 Hz
Power Consumption 980 watts
Standby Power Consumption
Normal < 0.5 watts
Network Standby < 2 watts
BTU (4 ohms, 1/8th power) 2744 BTU/h
Dimensions (W x H x D) 430 x 97 x 414 mm
17 x 3
7
/
8
x 16
2
/
7
ins
Front Panel Height 2U / 88.1 mm / 3
1
/
2
ins
Weight (net) 18.35 kg, 40.79 lbs.
Finish Black