Specifications

150 watts/ch (4 ohms)
80 watts/ch (8 ohms)
< 0.018%
< 0.03%
20 Hz - 20k Hz (0 ± 0.5 dB)
10 Hz - 100k Hz (0 ± 0.5 dB)
220
3.4 mV / 47k Ohms
230 mV / 24k Ohms
50 mV
4 V
1.2 V / 470 Ohms
± 10 dB at 100 Hz / 10k Hz
90 dB
100 dB
Maximum Power Output
Continuous Power Output
Total Harmonic Distortion
Intermodulation Distortion
(60 Hz : 7k Hz, 4:1)
Frequency Response
Phono Input
Line Level Inputs
Damping Factor
(20 Hz - 20k Hz, 8 ohms)
Input Sensitivity / Impedance
Phono Input
Line Level Inputs
Input Overload
Phono Input
Line Level Inputs
Preamp Output / Impedance
Tone Controls - Bass / Treble
Signal to Noise Ratio
(“A” weighting)
Phono Input
Line Level Inputs
Digital Section
Frequency Response
Signal to Noise Ratio
(IHF “A” weighted)
Input Sensitivity/Impedance
Preamplifier Output Level
Digital Inputs
PC-USB
General
Power Requirements
Europe
USA
Power Consumption
Standby Power Consumption
BTU (4 ohms, 1/8 power)
Dimensions (W x H x D)
Front Panel Height
Weight (net)
Finish
10 Hz - 90k Hz (0 ± 2.0 dB, Max)
103 dB
0 dBfs / 75 Ohms
1.4 V (at - 20 dB)
SPDIF LPCM
(up to 24-bit / 192k Hz)
USB Audio Class 1.0
(up to 24-bit / 96k Hz )
USB Audio Class 2.0
(up to 32-bit / 384k Hz )*
*Driver installation required
MQA and MQA Studio
(up to 24-bit / 384k Hz )
230 V, 50 Hz
120 V, 60 Hz
280 watts
< 0.5 watts
632 BTU/h
430 x 93 x 34 5 mm
17 x 3 5/8 x 13 1/2 in
80mm, 3 1/8 in
8.94kg, 19.71 lb
Silver and Black
SPECIFICATIONS
www.rotel.com
MQA and the Sound Wave Device are registered trade marks of MQA Limited.© 2016
Being Roon Tested means that Rotel and Roon have collaborated to ensure you
have the best experience using Roon soware and the Rotel equipment together, so
you can just enjoy the music.
STEREO INTEGRATED AMPLIFIER
A14MKII
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.