Specification Sheet

STEREO INTEGRATED AMPLIFIER
A12
60 watts/ch
< 0.03%
< 0.03%
20Hz - 15kHz, ± 0.5dB
10Hz - 100kHz, ± 0.5dB
220
3 mV / 47k Ohms
200 mV / 24k Ohms
50 mV
4 V
1 V / 470 Ohms
± 10 dB at 100Hz / 10kHz
90 dB
100 dB
Continuous Power Output
(20 - 20kHz, < 0.03%, 8 ohms)
Total Harmonic Distortion
(20 Hz - 20 kHz at rated power)
Intermodulation Distortion
(60 Hz : 7kHz, 4:1)
Frequency Response
Phono Input
Line Level Inputs
Damping Factor
(20 - 20,000 Hz, 8 ohms)
Input Sensitivity / Impedance
Phono Input
Line Level Inputs
Input Overload
Phono Input
Line Level Inputs
Preamp Output / Impedance
Tone Controls - Bass / Treble
Signal to Noise Ratio
(“A” weighting)
Phono Input
Line Level Inputs
Digital Section
Frequency Response
Signal to Noise Ratio
(IHF ”A” weighted)
Input Sensitivity/Impedance
Preamplifier Output Level
Digital Inputs
PC-USB
General
Power Requirements
Europe
USA
Power Consumption
Standby Power Consumption
Finishes
Dimensions (W x H x D)
Front Panel Height
Weight (net)
10Hz - 80kHz (± 3.0dB, MAX)
103 dB
0 dBfs/75 Ohms
1.3 V (at - 20dB)
SPDIF LPCM
(up to 192kHz / 24 bit)
USB Audio Class 1.0
(up to 96kHz 24bit)
USB Audio Class 2.0
(up to 192kHz 24bit)*
*Driver installation required
230V, 50Hz
120V, 60Hz
230 watts
< 0.5 watts
Silver and Black
430 x 93 x 345mm
17" x 3 5/8" x 13 1/2"
80mm, 3 1/8"
8kg, 17.6 lb
SPECIFICATIONS
Rotel integrated
amplifiers bring your
sources to life with
amazing fidelity.
See more at
rotel.com