Installation Guide

• INSTALL WITH 3/8 IN.

MINIMUM STAPLES.

• APPLY STAPLES 6-12 IN.

APART ON THE UNIT.

• WHEN SPLICING TWO

ROLLS TOGETHER OVER-

LAP WITH 2 IN.

• APPLY ROTBLOC 4X BEAM

TO THE TOP OF THE BEAM

EDGE WITH THE PRINT ON

TOP FACING UPWARDS.

NON - TOXIC

4X BEAM4X BEAM

NON-REACTIVE TO CHEMICALS

IN TREATED LUMBER PRODUCTS.

INSTALL

100%100%

RECYCLABLE

• INSTALL IN HOT OR COLD

WEATHER.

• INSTALL ON WET OR DRY

•• NOTE:NOTE: TO PREVENT CORROSION, STAINLESS STEEL STAPLES ARE RECOMMENDED.

PAGE 1
• NOTE: TO PREVENT CORROSION, STAINLESS STEEL STAPLES ARE RECOMMENDED. 4X BEAM NON - TOXIC N O N - R E AC T I V E T O C H E M I CA L S IN TREATED LUMBER PRODUCTS. 100% R E C YC L A B L E INSTA LL • INSTALL ON WET OR DRY • INSTALL IN HOT OR COLD WEATHER. • APPLY ROTBLOC 4X BEAM TO THE TOP OF THE BEAM EDGE WITH THE PRINT ON TOP FACING UPWARDS. • INSTALL WITH 3/8 IN. MINIMUM STAPLES. • APPLY STAPLES 6-12 IN. APART ON THE UNIT. • WHEN SPLICING TWO ROLLS TOGETHER OVERLAP WITH 2 IN.