Specifications

5
Introduction - Series II Rotary Cutter
Introduction
The Farm King Series II Rotary cutter available in 60", 72" and 84" and are equipped with either
trailing style or 3-point hitch. The 3-point hitch is Quick Hitch compatible so it is easy to attach and
unhook. 3-point hitch models include a single solid rubber training wheel, while rotary cutters with
a trailing hitch have two wheels, either air-filled or made of solid rubber.
Farm King Rotary Cutters are built tough and made to last. The blades are heat-treated to enhance
rigidity and the heavy-duty gearbox is designed to be rugged and durable. The access panel on the
deck makes it easy to inspect or replace the blades. An optional chain kit minimizes the possibility
of flying debris. The stump-jumper is a 24" plate mounted to the blades below the gearbox and
minimizes stress on the deck and gearbox. The power take-off (PTO) shaft on the Series II 60"
Rotary Cutter includes a sheer pin to protect the gearbox in the event of an unforeseen obstacle,
while the 72" and 84" rotary cutters are equipped with a slip clutch to prevent gearbox damage.
The Y720T with the trailing style hitch includes a two-piece PTO shaft for tighter turning radius.
An 8" cylinder and hoses are optional for all trailing models.
Keep this manual handy for frequent reference. All new operators or owners must review the
manual before using the equipment and at least annually thereafter. Contact your Farm King
Dealer if you need assistance, information, or additional copies of the manual. Visit our website
at www.buhlerindustries.com for a complete list of dealers in your area.
The directions left, right, front and rear, as mentioned throughout this manual, are as seen facing
in the direction of travel of the implement.