Installation and Operation Instructions

Octopus10 14/12/20 Page 2 of 3
For smooth operation and performance of the Octopus Automatic Filter Backwash Controller, make sure to perform the startup and first
operation procedures exactly as described in this manual.
Operation and Maintenance:
Do not operate the Octopus Automatic Filter Backwash Controller before reading carefully and being familiar with its operation instructions.
Never operate or use the Octopus Automatic Filter Backwash Controller for purposes other than its original design and operational
envelope.
When servicing the Octopus Automatic Filter Backwash Controller, disconnect it and the filters from the power supply.
Before returning to regular operation follow the First-time Start-up Operation instructions as detailed in this user manual.
The FCC Wants You to Know
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and
used in accordance with the instructions, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment under FCC Rules.
This device is only authorized for use in a mobile application. At least 20 cm of
separation distance between the FC10 - Octopus device and the user's body must be
maintained at all times.