User manual

User Menu Options
HomeLogiX, HLX-40 User Guide
Page 30
2. Select the pre-enrolled remote control number 01-08 by
either browsing the remotes using the Menu
3. You will be asked to confirm deletion, Press
button or by
entering the remote number using the numeric keypad.
Enter to delete
the detector or the ESC
button to go back.
9.8 Setting Phone Numbers
You can specify up to three private telephone numbers that
are called by the wireless panel when an event occurs.
To define Phone Numbers:
1. Using the Menu button, select Private Numbers and press
Enter
2. Using the
.
Menu button, or numeric keypad, choose
between Private numbers 1, 2 or 3 and press Enter
3. Using the numeric keypad, enter the telephone number
and press
.
Enter to confirm. Press the pound key (#
The private numbers are set.
) to
delete an existing number.
Note:
For PABX use the digit followed by "," and then the full
number
Note:
When setting more than one number, the system will call
the first number followed by the second and then the
third. Once any one of them answers the call the system
will stop reporting
9.9 Activating / Deactivating PC Mode
Enable or disable PC connection and activity when GSM
expansion is installed. For security reasons after activating PC
mode you have 2 minutes to begin activity. After two minutes
of no activity the system will automatically deactivate.
To set the PC mode:
1. Using the Menu button, select PC Mode and press Enter
2. Using the
.
Menu button, select Activate or Deactivate and
press Enter to confirm.