User manual

User Menu Options
HomeLogiX, HLX-40 User Guide
Page 26
9. User Menu Options
9.1 Accessing the User Menu
Press the Menu button to reach the USER MENU and press Enter
You will be asked to enter code (user or master), type in your 4
digit code.
.
Entering the correct code will bring you to the user menu sub
menus. If a wrong code was entered, the system will emit a
long beep indicating an error and will wait once again for the
correct code to be entered.
No activity for 30 seconds will cause the system to return to
normal mode.
Once in the USER MENU use the Menu button to browse the
sub menus. Press Enter
9.2 Changing the Master Code
to access the desired sub menu as
detailed below.
You can change the master code.
Note:
This feature is only for master users.
To change the master code:
1. Using the Menu button, select Edit Master Code and press
Enter
2. Using the numeric keypad, enter the new master code and
press
.
Enter
The master code is changed.
to save.
9.3 Defining User Codes
You can use the panel to define up to twenty users.
Note:
This feature is only for master users.