User manual

System Overview
HomeLogiX, HLX-40 User Guide
Page 15
The following table describes the keypad functions:
Key
Press to
Menu
Navigate between User and Installer menus,
and Normal mode.
Navigate to the next menu or the next
option within a menu.
Enter
Accept an entry or selection.
Local
Emergency
When pressed for 3 seconds a standard
panic alarm Sounds
AWAY
Arm all sensors and detectors. Use this
function when there is no one in the
home/office. You must enter a user or
master code.
HOME
Arm all perimeter sensors and detectors as
defined by the installer. Use this function
when the home/office is occupied. You
must enter a user or master code.
DISARM
Disarm all armed sensors and detectors. You
must enter a user or master code.
If the duress code is enabled by the
installer, entering the duress code when
disarming sends a duress event to the
Central Station and Private Phone.
The system will lockdown for 30 seconds in
the event of 5 failed attempts to disarm the
system
ESC
Press to ignore an entry (escape) or to
move one level up in a menu.