User manual

System Overview
HomeLogiX, HLX-40 User Guide
Page 13
Status indicator
Status LED: green On: system armed.
Off: system disarmed.
Flash: entry and exit delay (according to
beep rate)
Keypad door
Open to access the keypad buttons
Local sounder
System speaker
Microphone
Enables the recording of voice messages
Local emergency
button
Keep pressed for 3 seconds to sound a
standard panic alarm
Display
LCD display
Enter
Accept an entry or selection
4.2 The LCD Display
The LCD display clearly shows the system status. The display
consists of two rows. The bottom line is divided into two and
displays the system status and events.
When in idle mode the first line displays the system's name
(HomeLogiX by default) while the second line shows the system
status. For example, the second line displays Ready
Pressing
.
#
The system status is displayed on the left of the bottom line. The
events are displayed on the right of the system status. If there is
more than one event, the event display toggles every two
seconds. There are several display options as described below:
(pound key), toggles the first line display between
the System name display and the Time & Date display.
System Status
Ready
Indicates that the system is ready for arming.
Not ready
Indicates that the system is not ready and that there are
active zones.
Press Enter to see which zones are active. If there is more
than one active zone pressing Enter or Menu
When there are no more active zones the display returns
to the idle view. You can also exit the active zone view
by pressing the
displays the
next open zone.
ESC, Away or Home buttons.