User manual

Operating the HLX-40
HomeLogiX, HLX-40 User Guide
Page 9
If a zone of type Delay is violated while the system is armed
(except Instant Arming), the system does not enter Alarm
mode during the Entry Delay period setting. If the delay has
transpired and the system still has not been disarmed, the
system enters Alarm mode.
During Entry Delay, the system signals the keypads to sound
warning beeps at two rates: slower rate and faster rate during
the last 10 seconds of the delay period.
2.4.2. Exit Delay
Exit delay allows the user a grace period for the time it takes
him to reach the door from the keypad when arming the
system upon exit.
When arming a panel, the system ignores zone violations of the
predefined delay zones during the Exit Delay period. Once the
delay has transpired, the system enters armed mode.
Note:
During HOME arming the system will ignore all interior
zones as well as the predefined delay zones.
The system may be disarmed during the Exit Delay period.
During Exit Delay the system emits warning beeps at two rates:
slower rate followed by a faster rate of beeping during the last
10 seconds of the delay period.