Specifications

Installer Menu
46 HLX-40 Installer Manual
2. Using the Menu button, choose the reporting options for each group as
desired, the options are Disable, Enable, Voice Alert, Text Alert, or
Both voice and text.
3. Press Enter to confirm. The available reporting groups are:
 Alarms (Voice by default)
 Troubles (Voice by default)
 Alerts
 Bypass
 Arm/disarm
 Restore
4. Press ESC to exit the submenu.
5. Dialing Attempts – Specify the number of cycles the panel goes through
while attempting to connect to a remote private phone, where a cycle
consists of up to 3 different remote private phones. The default is 3
attempts.
a. Using the numeric keypad, enter the dialing attempts value
between 1 and 15.
b. Press Enter to save.
6.6.4 CS Report Setup
This menu allows you to set the Central Station (CS) report options.
To set up CS report:
1. Using the Menu button, select each of the following submenus and press
Enter to confirm:
a. CS Report method – Specify the reporting method.
i. Using the Menu button, select one of the following:
 Disable (default)
 Primary Only
 Alternate
 Secondary Only
 Both
ii. Press Enter to confirm.
b. CS Primary – Specify the first telephone number of the first central
station to which the system reports in case of an event as well as the
primary account code and report options.
c. Phone Number – Using the numeric keypad, enter the primary CS
telephone number and press Enter to confirm. Use the asterisk key
(*) to enter a comma. Use the pound key (#) to delete the last digit.