Specifications

Installer Menu
HLX-40 Installer Manual 45
This menu allows you to define and setup the GPRS settings of the HLX-40 unit
according to the network provider specifications. Contact your service provider
for the list of parameters as defined by the cellular network provider.
For detailed instructions of the PC and application setup, please refer to the
HR-P02 software manual.
To set up the GPRS communication:
1. Press Enter to access the GPRS Setup submenu.
2. Using the Menu button, select each of the following submenus and press
Enter to confirm.
a. APN – Enter the GPRS access point.
b. User Name – Enter the GSM provider name.
c. Password – Enter the GSM provider’s password.
d. Server IP – Enter the network’s server IP.
e. Server Port – Enter the network’s server port.
f. Listen Port – Enter the Listen Port number with which the software
connects to the unit.
Use the numeric keypad to enter alphanumeric values for each parameter.
Use the asterisk key (*) to enter a comma. Use the pound key (#) to delete
the last digit.
3. Press Enter to exit to the
GPRS Setup submenu.
6.6.3 Private Report
This menu enables you to set the private telephone report options as detailed
below.
To set up private report:
1. Using the Menu button, select each of the following submenus and press
Enter to confirm:
a. Set Numbers – Specify the telephone numbers of the subscribers to
which the system reports. You can enter up to three numbers.
i. Using the Menu button, choose between number 1, 2 or 3 and
press Enter.
ii. Using the numeric keypad, enter the telephone number and
press Enter to confirm. Use the asterisk key (*) to enter a
comma. Use the pound key (#) to delete the last digit.
b. Link Type – Choose between PSTN and GSM communication types.
If the GSM stick is not installed, the Link Type is set to PSTN, and cannot be
changed.
c. Report Options – Specify the event groups that are included in a
report.