Specifications

Installer Menu
HLX-40 Installer Manual 41
6.5.18 Alarm Cancel
Specifies the amount of time during which if the user disarms the alarm, the
system sends a “Cancel Alarm” message to the central station. By default,
Alarm Cancel
is set to 00 minutes (disabled).
To set the Alarm Cancel:
1. Using the numeric keypad, set the alarm cancel time between 0160
minutes or 00 to disable the option.
2. Press Enter to confirm.
6.5.19 Alarm Abort Time
The system sounds a warning, but the central station does not receive
notification of the alarm if the user disarms the system within the specified
alarm abort time. This function applies to interior and/or perimeter zones only.
The
Alarm Abort Time
is set to 00 minutes (disabled).
To set the alarm abort time:
1. Using the numeric keypad, set the alarm abort time between 0160
seconds or 00 to disable the option.
2. Press Enter to confirm.
6.5.20 Backlight Time
Specifies the backlight options; by default, the backlight time is set to 15
seconds.
To set the backlight:
1. Using the Menu button, select one of the following options:
Always: to specify that the keypad and buttons are backlit at all
times.
15 secs: to specify that the keypad and buttons are backlit for up to
15 seconds after last key press.
2. Press Enter to confirm.
6.5.21 Hide Display
Enables you to specify that when armed, the system does not display the
system statuses or other system prompts; by default,
Hide Display
is off.
To display the system status:
1. Using the Menu button, select one of the following options:
Off to display status and prompts.
On to hide status and prompts.
2. Press Enter to confirm.