Specifications
Installer Menu
40 HLX-40 Installer Manual
6.5.15 Instant Arm
Enables the user to instantly arm the system by bypassing the Exit Delay;
Instant Arm is set to disable by default.
To enable/disable the Instant Arm option:
1. Using the Menu button, select either Enable or Disable.
2. Press Enter to confirm.
To utilize Instant Arm:
1. Arm the system using one of the arming options. Once the exit delay
countdown initiates, press either the AWAY or HOME keys once again.
6.5.16 Panic Button
The user can generate an alarm (audible or silent) by pressing continuously on
the emergency button on the control panel. The remote control panic button
remains active at all times if enrolled. The local emergency button is disabled
by default.
To set a panic button:
1. Using the Menu button, select one of the following options:
Audible: to set an audible panic alarm that transmits a message to
the CMS or private telephone set.
Silent: to set a silent panic alarm that transmits a message to the
CMS or private telephone set, but without a siren
Disabled: to disable the panic alarm button all together
2. Press Enter to confirm.
6.5.17 Duress Code
The system allows you to define a duress code, which a user can enter when
forced to disarm the system under duress. The duress code is disabled when
there is no duress code defined in the system. By default, the duress code
option is disabled.
The duress code should NOT be identical to any other existing code.
To change the duress code:
1. Type a new four-digit duress code using the numeric keypad.
2. Press Enter to save your new code.