Specifications

Installer Menu
HLX-40 Installer Manual 29
6. Installer Menu
The Installer’s menu enables access to the following group of options:
 Change code
 Zones
 Enrolling
 Security
 Communications
 Automation
 Messages
 Maintenance
6.1 Accessing the Installer Menu
1. Press the Menu button twice to reach the
INSTALLER MENU option and
press Enter.
The default Installer menu code is “8888”.
If a wrong code is entered, the system indicates that an illegal code was
entered and waits once again for the correct code to be entered. After 30
seconds of no entry, the system returns to Normal mode automatically.
The system locks out for 90 seconds after entering 5 wrong codes.
No activity within the menu for 4 minutes causes the system to return to
Normal mode. To return to Normal mode before 4 minutes pass, press the
ESC button.
2. Once in the
INSTALLER MENU , use the Menu button to browse the
submenus.
3. Press Enter to access the desired submenu as detailed below.
Some menus can be accessed directly by typing the option number instead of
scrolling the various options.