Specifications

Installation
HLX-40 Installer Manual 25
4.8 Mounting the Back Plate
4.8.1 General
To complete the installation without exposed wires, all the wiring should be
done through the wall. The wiring to the back plate can be done without
having exposed wires, by installing the panel on a standard electrical box, or
making a hole in the wall for the wiring.
Figure 14: Back Plate
Figure 15: Back Plate Mounting and Wiring
When drilling the hole for the wires, it is recommended to drill the hole in the
marked out area.
It is important to mount the back-plate first before connecting any of the
wiring to the unit.
4.8.2 Required Space
The required space on the wall for the panel is (L) x (H). The hole size for the
wires is 2 x 5 cm. This is to be drilled according to the openings on the back
plate.