Specifications

Installation
HLX-40 Installer Manual 23
This wired input acts as a regular sensor and functions likewise in armed and
disarmed mode.
4.4.6 Wiring the Wired Tamper Input
Wire tamper input: 24-hour active on zone 40.
Figure 11: Wiring to Tamper Input
4.4.7 Wiring the HLX-40 Telephone Connectors
Terminal Blocks for Line-In and Tel Line-Out
Figure 12: Wiring to Telephone
4.5 Connecting the MD-CC101 GSM Stick
The HLX-40 has an optional GSM stick, which enhances the system’s
performance by allowing GSM communication used as a backup line
communication when a problem occur with the PSTN line.
When using the GSM module, the system also allows a private phone to
receive both voice and SMS messages (alerts, troubles, bypass, arm/disarm).
The user can also send commands to the system via SMS messages, allowing
arming (home/away), disarming, and PGM activation/deactivation.
The system automatically detects the availability of the GSM stick upon initial
power up; it also tests the reception levels and displays them on the screen.
The reception must be above 21.00 to be ready for use.
Some menu options are only available if the GSM stick is detected.
The GSM stick enhancement only works with a battery pack connected.