Specifications

Installation
HLX-40 Installer Manual 21
4.4.2 Resistors
The HLX-40 family is provided with 2 10.0 kOhm resistors for the hardwire
zone and Tamper connections.
Figure 7, Table 6, and Table 7 help in the understanding of the resistor color
scheme:
Figure 7: Resistors
Stripes 1 and 2 represent numbers that together with stripe 3 which represents
the number of zeros represents the resistor’s value in Ohm. Stripe 4 represents
the tolerance. All resistors provided by Rosslare have a 5% tolerance
represented by the color Gold. To read the Resistor number, hold the unit with
the gold stripe on the right.
The color scheme is as follows:
Table 6: Resistor Color Scheme
Black 0
Brown 1
Red 2
Orange 3
Yellow 4
Green 5
Blue 6
Violet 7
Grey 8
White 9
Based on the above color scheme the resistor provided is as follows:
Table 7: Resistors Provided
Color
Resistor



10.0 kOhm
Brown Black Orange
4.4.3 Siren Relay Output – Wiring to External Siren
The relay output for an external siren can be programmed as normally open or
normally closed (fail-safe) operation.



