Specifications

HLX-40 Quick Reference
14 HLX-40 Installer Manual
Key Icon Press to
Esc
Ignore an entry or move one level up in a menu.
2.2.1 Keypad Operated Functions
When the system is idle, the alphanumeric keys initiate the commands shown
in Table 3.
Table 3: Keypad Operated Functions
Press To
0 Memory Display
Press once to display the alarms caused during the last arming period per
zone. The first line of the displays shows the alarm memory, and the second
line shows the zone description, event and time. The display toggles between
zone description and the date by pressing the Enter button.
Press Menu to display the next alarmed zone.
Press Esc to exit.
Note: When EN-CENELEC standard is enabled, only the master user
can access the memory display.
1 PGM ON
Press once to enter PGM activation mode, the PGM status is indicated on the
right. Press 1 to activate PGM 1 and/or 2 to activate PGM 2.
2 PGM OFF
Press once to enter PGM deactivation mode, the PGM status is indicated on
the right. Press 1 to deactivate PGM 1 and/or 2 to deactivate PGM 2.
3 Chime ON/OFF
Manually toggle the chime on and off.
4 Volume
Manually toggle the beep volume level.
5 Sound ON/OFF
Manually toggle voice messages, keypad tone, and other sounds on and off.
6 Bypass
Enter the User menu Bypass option.
7 Record User Message
Record a voice message of up to 15 seconds. Press and hold key 7 for 3
seconds to erase a message.
8 Event Log Display
Press once to display the event log. The first line of the display shows the
event log and the second line shows the zone description (or system, if a
system event is displayed), event date and time. The display toggles between
zone description and the date by pressing the Enter button.
Press again or press Menu to display the next event.
Press Esc to exit the menu.
Note that a master code is required to access this function.