User manual

User Menu Options
HLX-40 User Manual 29
9. User Menu Options
9.1 Accessing the User Menu
To access the User menu:
1. Press the Menu button to reach the USER MENU and press Enter.
You are asked to enter code (user or master).
2. Enter your 4-digit code.
Entering the correct code brings you to the user menu sub-menus. If a
wrong code is entered, the system emits a long beep indicating an error
and waits once again for the correct code to be entered.
Inactivity for 30 seconds causes the system to return to Normal mode.
3. Once in the
User menu, use the Menu button to browse the submenus.
4. Press Enter to access the desired submenu as detailed below.
9.2 Changing the Master Code
You can change the master code.
This feature is only for Master users.
To change the master code:
1. Using the Menu button, select Edit Master Code and press Enter.
2. Using the numeric keypad, enter the new master code and press Enter to
save.
The master code is changed.
9.3 Defining User Codes
You can use the panel to define up to twenty users.
This feature is only for Master users.
To define user codes:
1. Using the Menu button, select User Codes and press Enter.
2. Using the numeric keypad, select a user (1–20) and press Enter.
3. Using the numeric keypad, type a 4-digit code and press Enter to save.
4. Press the pound key (#) to delete an existing number.