User manual

Reading the Event Log
HLX-40 User Manual 27
7. Reading the Event Log
The HLX-40 event log stores up to 250 events. When the log is full, the new
incoming event replaces the oldest event.
Events are displayed in a chronological order and include the date and time of
their occurrence.
To access the Event Log:
1. Access the event log by pressing 8 on the keypad when the system is in
Normal mode.
2. To read an event, enter the master code and press Enter.
3. Browse the event log using the Menu button or go directly to an event by
entering the event number using the numeric keypad.
4. Press Enter to view the date and time of the occurrence.
When EN-CENELEC standard is enabled, only the Master user can access the
event log.
In EN-CENELEC standard menu, the event filter may be changed (default=10),
so if an event reoccurs, the system only shows the event the defined number of
times in the event log.
The event registration into log reoccurs after system disarming. For more
information, consult the Installer.