User manual

System Overview
HLX-40 User Manual 19
Key Press to
DISARM
Disarm all armed sensors and detectors. You must enter
a user or master code.
If the duress code is enabled by the Installer, entering the
duress code when disarming sends a duress event to the
Central Station and Private Phone.
The system is locked out for 90 seconds in the event of 5
failed attempts to disarm the system.
QUICK
Ignore an entry (escape) or to move one level up in a
menu.
0
Normal mode
only
Memory Display
Press once to display the alarms caused during the last
arming period per zone. The first line of the displays
shows the alarm memory and the second line shows the
zone description, event and time.
Press Enter to toggle view between zone description
and the Time & Date.
Press Menu to display the next event.
Press Esc to exit.
You can also use 0 to insert a space when typing an
entry.
Note: When EN-CENELEC standard is enabled, only the
Master user can access the memory display.
1
Normal mode
only
PGM ON – If enabled by Installer.
Press once to enter PGM activation mode. The PGM
status is indicated on the right. Press 1
to activate PGM 1
and/or 2 to activate PGM 2.
2
Normal mode
only
PGM OFF – if enabled by Installer.
Press once to enter PGM deactivation mode. The PGM
status is indicated on the right. Press 1 to deactivate
PGM 1 and/or 2 to deactivate PGM 2.
3
Normal mode
only
Chime ON/OFF
Manually toggle the chime on and off (if enabled by the
installer) The default is off.
4
Normal mode
only
Volume
Manually Adjust the system’s volume level.
5
Normal mode
only
Sound ON/OFF – If enabled by Installer.
Manually toggle voice messages, keypad tone, and other
sounds on and off (except for trouble beeps, forced
arming, enrollment and RF test of wireless devices which
is always on).
6
Normal mode
only
Bypass – If enabled by installer.
Enter the last User menu Bypass option to arm the
system by bypassing active zones. You must enter a user
or master code.