User manual

System Overview

18 HLX-40 User Manual

4.3 The Keypad

The keypad is used to program the wireless panel and to arm and disarm the

sensors.

Figure 5: The Keypad

Table 4 describes the keypad functions:

Table 4: Keypad Functions

Key Press to

Navigate between User and Installer menus, and Normal

mode.

Navigate to the next menu or the next option within a

menu.

Enter

Accept an entry or selection when in the menu.

Displays the panel current status when in standby.

Local

Emergency

When pressed for 3 seconds, a standard panic alarm

Sounds

AWAY

Arm all sensors and detectors. Use this function when

there is no one in the home/office. You must enter a

user or master code.

HOME

Arm all perimeter sensors and detectors as defined by

the Installer. Use this function when the home/office is

occupied. You must enter a user or master code.