Instruction manual

Controller Functionality
AYC-Fx4 and AYC-Gx4 family manual Page 36
6.9.6. Changing the Programming Code
1) Enter Programming mode.
2) Press “3” to enter Menu 3.
• The Mode LED will turn
green.
3) Enter the new code you wish to set
as Programming Code
4) System returns to Normal
mode.
• You will hear three beeps.
Note:
•
Programming Code cannot be erased, i.e. the code 0000 is
not valid and will not erase the Programming Code.
• The factory four digit programming code is 1234.
6.9.7. Changing the Normal / Secure Code
1) Enter Programming mode.
2) Press “4” to enter Menu 4
• The Mode LED will flash red.
3) Enter the new code you
wish to set as Normal /
Secure Code
4) System returns to Normal
mode
• You will hear three beeps
Note:
• Code 0000 will erase the Normal / Secure Code.
• This code is disabled in case the Auxiliary Input is set to
toggle between Normal and Secure access modes.
• Default Normal/Secure code is 3838
3
?
?
?
?
4
?
?
?
?
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Green
Green
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Green
Mode/Transmit
Door/Program
Red
Green
Mode/Transmit
Door/Program
Green