Instruction manual

Reader Functionality

AYC-Fx4 and AYC-Gx4 family manual Page 25

• The Transmit LED will turn

red.

3) Enter the new 4 digit code you wish

to set as the Programming Code

4) System returns to Transmit Mode

• You will hear three beeps

• The Program LED will turn off

• The Transmit LED will turn red

Note:

• Programming Code cannot be erased, i.e. the code 0000 is

invalid and will not erase the Programming Code.

•

The factory default 4-digit Programming Code is 1234.

5.2.4. Changing the Facility

Code

1) Enter Programming Mode.

2) Press “4” to enter Menu 4.

• The Transmit LED will turn

red.

3) Enter the new 3-digit code you wish

to set as the Facility Code

4) System returns to Transmit Mode

• You will hear three beeps

• The Program LED will turn off

• The Transmit LED will turn red

Note:

• Facility Code can be in the range of 000 to 255.

• The default Facility Code is 0.

Mode/Transmit

Door/Program

Red

Green

Mode/Transmit

Door/Program

Red

Mode/Transmit

Door/Program

Red

Green

Mode/Transmit

Door/Program

Red

Mode/Transmit

Door/Program

Green