Programming Manual
Table Of Contents
- 1. Introduction
- 2. Technical Specifications
- 3. Installation
- 4. Operation
- 5. Programming
- 5.1 Entering the Programming Mode
- 5.2 Exiting the Programming Mode
- 5.3 Changing the Open Code
- 5.4 Changing the Auxiliary Code
- 5.5 Changing the Programming Code
- 5.6 Changing the Normal/Secure Code
- 5.7 Changing the Normal/Bypass Code
- 5.8 Setting Fail Safe/Secure Operation
- 5.9 Setting Auxiliary Modes
- 5.10 Setting the Lockout Feature
- 5.11 Setting the Backlight Behavior
- 5.12 Enrolling Primary and Secondary Codes
- 5.13 Deleting Primary and Secondary Codes
- 5.14 Relay Codes Assignment
- 5.15 Changing PIN Code Length/Factory Default Settings
- 5.16 Replacing a Programming Code
- 5.17 Replacing a Normal/Secure Code
- A. Declaration of Conformity
- B. Limited Warranty
Programming
AC-F/G4x Series Installation and Programming Manual 43
Table 3: Quick Reference Guide for Auxiliary Mode Setting
Auxiliary
Mode
Auxiliary
Input
Function
Auxiliary
Output
Activated
by
Auxiliary
Relay
Auxiliary
Settings
(in seconds)
0 AUX REX
Valid code or
AUX REX
N.O.
01 to 99 Aux. Relay
Release Time
00 Aux. relay
toggle
1
Normal/Secure
switch
Valid code N.O. 01 to 99
Aux. Relay
Release Time
00 Aux. relay
toggle
2
Normal/Secure
switch
Star button
(*)
N.O.
01 to 99 Aux. Relay
Release Time
00 Aux. relay
toggle
3
Normal/Secure
switch
Tamper event
N.C.
01 to 99
Aux. Relay
Release Time
00 Aux. relay
tamper activated
4
Normal/Secure
switch
Direct shunt N.O. 01 to 99 Shunt
time
5 Door Monitor Shunt N.C. 01 to 99 maximum
Shunt time