Programming Manual
Table Of Contents
- 1. Introduction
- 2. Technical Specifications
- 3. Installation
- 4. Operation
- 5. Programming
- 5.1 Entering the Programming Mode
- 5.2 Exiting the Programming Mode
- 5.3 Changing the Open Code
- 5.4 Changing the Auxiliary Code
- 5.5 Changing the Programming Code
- 5.6 Changing the Normal/Secure Code
- 5.7 Changing the Normal/Bypass Code
- 5.8 Setting Fail Safe/Secure Operation
- 5.9 Setting Auxiliary Modes
- 5.10 Setting the Lockout Feature
- 5.11 Setting the Backlight Behavior
- 5.12 Enrolling Primary and Secondary Codes
- 5.13 Deleting Primary and Secondary Codes
- 5.14 Relay Codes Assignment
- 5.15 Changing PIN Code Length/Factory Default Settings
- 5.16 Replacing a Programming Code
- 5.17 Replacing a Normal/Secure Code
- A. Declaration of Conformity
- B. Limited Warranty
Programming
32 AC-F/G4x Series Installation and Programming Manual
Menu
No.
Description Default Section
4
Digits
5
Digits
6
Digits
4-8
Digits
code
5 Change Normal/Bypass
code
N/A 5.7
6 Change Door Release
time
0004 5.8
6 Define auxiliary
inputs/outputs
2004 5.9
6 Set Lockout Feature 4000 5.10
6 Backlight and LED
Behavior
5100 5.11
7 Enroll proximity cards,
PIN or both
N/A 5.12
8 Delete proximity cards or
PIN
N/A 5.13
9 Code assignment with
strike/auxiliary
N/A 5.14
0 Return to factory
defaults/Change PIN
code Length
N/A 5.15