Instruction manual

LOCK STRIKE
POWER
AUXILIARY
Push the terminal blocks onto
the controllers connector pins.
Connecting the wires to the removable terminal blocks
Page 11
07/04
5) Screw the AC-Q41H back cover to its mounting location.
6) Attach the removable terminal blocks to the Controller.
7) Return the front cover of the AC-Q41H to the mounted back
plate.
8) Secure the front cover by using the supplied security screw in the
controllers accessories kit. An L-Shaped tool is provided for use
when tightening the security screw.
Wiring the AC-Q41H
A few of the typical wiring diagrams are shown on the next three
pages; for other wiring diagram examples refer to the support
section of the Rosslare Web Site.
http://www.rosslaresecurity.com
AC-Q41H