Instruction manual

Page 4
07/04
Introduction
Equipment provided
The following is provided as part of every AC-Q41H package:
The AC-Q41H is a vandal resistant keypad access control unit
suitable for internal or external applications.
The unit accepts up to 500 users and provides entry via the use of
PIN codes.
- AC-Q41H Access Control Unit.
- Installation Kit
- Installation and Operating Instructions
Additional Equipment Required
1) Electric Lock Strike Mechanism
Fail Safe (Power to Lock) or Fail Secure (Power to Open)
2) Power Supply with Backup Battery
12 to 24V DC (From a Regulated Power Supply)
or
16 to 24V AC (From a Transformer)
3) Request To Exit (REX) Button
Normally Open Type - Switch is closed when pressed.
4) BL-D40 External Sounder (Optional)
Provides Siren, Bell, and Chime functions for AC-Q41H
Other Rosslare accessories can be found at Rosslare's
Web Site:
http://www.rosslaresecurity.com
AC-Q41H
07/04
Technical Specification
Electrical Characteristics
Operating Voltage Range:
12 to 24V DC From a Regulated Power Supply
or
16 to 24V AC From a Transformer
Maximum Input Current (when heating is inactive):
At 12V DC
Standby: 40mA Not including attached devices
Max: 100mA Not including attached devices
Maximum Input Current (when heating is active):
At 12V DC Max: 630mA Not including attached devices
At 24V AC Max: 350mA Not including attached devices
Relay Outputs:
Lock Strike Relay Form C, 5A
Auxiliary Relay Form C, 5A
Inputs:
REX N.O., Dry Contact
Auxiliary Input (In / Monitor) N.O., Dry Contact
LEDs
Two Tri-colored LEDs
Environmental Characteristics
Operating Temperature:
Keypad Heater Enabled: -4 F to 145 F (-20 C to 63 C)
Keypad Heater Disabled: -32 F to 145 F (0 C to 63 C)
Operating Humidity: 0 to 95% (Non-Condensing)
Suitable for outdoor use. (IP 65)
Page 5
AC-Q41H