Instruction manual

Programming
4.14 RELAY CODES ASSIGNMENT
When a primary code is enrolled for any user, the user is
authorized to activate the Lock Strike relay. However, different
user codes may be set to operate the auxiliary relay instead or
operate both the Lock strike and auxiliary relay. Assignment of
such codes is achievable for any valid user code entered in the
controller.
There are two methods to assign relay codes to users: a standard
method and a search method.
4.14.1 Relay Code Assignment using Standard Method
1) Enter the programming mode.
Mode
Door
Green
2) Depress 9 to enter Menu 9.
• The Mode indicator will turn green.
Mode
Door
Green Oran
g
e
• The Door indicator will turn orange.
3) Enter the 3-digit user slot for code assignment.
? ? ?
AC-Q4x Family, Installation and user Manual Page 49
• The Door indicator will flash green.
4) Enter the assignment digit for the current user slot:
• 1 will activate the Lock Strike relay only deafult
• 2 will activate the Auxiliary relay only
• 3 will activate the Lock Strike and Auxiliary relays.
If the assignment code is valid, the Mode
indicator will stop flashing.
The controller is now waiting for another slot number. Depress the
# key to move to the next slot or enter a new slot number. If you
do not wish to continue, depress the # key twice and the
controller will return to its normal mode.
Mode
Door
Green Orange
Mode
Door
Green
Oran
g
e