Instruction manual

Programming
4.12.4 Standard Method for Codes Enrolling
1) Enter the programming mode.
Mode Door
Green
2) Depress 7 to enter Menu 7.
The Door indicator will turn orange.
Mode
Door
Oran
g
e
3) Enter the 3-digit user slot number into the memory
(from 001 to 500) so as to enroll a primary or
secondary code.
For example, the user slot 003 represents user no. 3.
? ? ?
4) At this time three possibilities exist:
a. If the selected slot has no primary code, the Mode
indicator will flash green, indicating
that the controller is ready to
accept a primary code.
b. If the selected slot already has a primary code, but no
secondary code, the Mode
indicator will flash red, indicating
that the controller is ready to
accept a secondary code.
Mode Door
Green
Orange
Mode Door
Red
Orange
c. If the selected slot already has a primary and secondary
code, a long beep will be heard and the controller will
return to its normal mode.
5) Enter the code to be assigned as the primary or secondary
code for this slot number.
If the code that is entered is valid, the Mode indicator will
cease flashing and the controller is ready for the next 3-digit
slot number (step 3) or depress the # key to move to the next
slot number (step 4). If you do not wish to continue enrolling
codes, depress the # key twice and the controller will return
to its normal mode.
Page 45 AC-Q4x Family, Installation and user Manual