Instruction manual

Programming
AC-Q4x Family, Installation and user Manual Page 44
• A primary code must be unique; for instance, one user’s
primary code may not be the same as that of another user.
• Primary codes cannot be the same as system codes, such as:
the normal / secure code or the open code.
• Users possessing a primary code can gain entry during
normal and bypass modes.
4.12.2 Secondary Codes Definition
• Secondary codes can only be enrolled to a user slot that
already includes a primary code.
• A Secondary code need not be unique; for instance, one
user’s Secondary code may be the same as that of another
user.
• Secondary codes cannot be the same as any system codes,
such as: the normal / secure code or the open code.
• Users possessing secondary codes can gain entry in any
mode of operation.
• A Secondary code can be the same as the primary code of
any user.
4.12.3 Primary and Secondary Codes Enrolling Methods
There are two methods used to enroll primary and secondary
codes: the standard method and the code search method.
1) The
standard method is used when the user slot number, for
the user you wish to program, is known. You can program
both primary and secondary codes using this method.
2) The code search method is mainly used when enrolling a
secondary code and the user’s slot code is unknown. The
code search method will function only if a user’s primary
code is already enrolled and the secondary code is not.