Instruction manual

Programming

4.11 BACKLIGHT and LED BEHAVIOR

⌦

APPLICABLE FOR AC-Q4xHB/SB MODELS ONLY (backlight)

The controller allows you to define the way the units' Backlight as

well as the Mode and Door LEDs will work.

To define the Backlight and LEDs operation:

1) Enter the programming mode.

2) Depress 6 to enter Menu 6.

Mode

Door

Green

• The Mode indicator will flash green.

3) Construct a code using the following

instructions:

the first digit is five indicating the backlight

and Led option

the second key can be 0-3 indicating the

type of activity

5 ? 0 0

AC-Q4x Family, Installation and user Manual

Page 43

• Option 0 - LED Active / Backlight Off

• Option 1 - LED Active / Backlight On

(default)

• Option 2 - LED and Backlight Off, both

activated on any key press for ten seconds.

• Option 3 - LED Active / Backlight Dimmed,

backlight activated on any key press for

ten seconds.

4.12 ENROLLING CODES

4.12.1 Primary Codes Definition

• Primary codes can only be enrolled to an empty user slot, a

slot with no existing primary code in the controller’s memory.