Instruction manual

Programming

During Lockout, Mode LED is Off, Door LED flashes Red, and the

controller beeps every two seconds.

The default setting for the Lockout Feature is 4000 (Lockout

Disabled)

Note:

Using the lockout feature is highly recommended, especially

when selecting to use short PIN code length (4 or 5 digits).

1) Enter the programming mode.

2) Depress 6 to enter Menu 6.

Mode

Door

Green

• The Mode indicator will flash green.

AC-Q4x Family, Installation and user Manual Page 42

3) Construct a code using the following

instructions:

Set the number of wrong code

attempts, which will cause Lockout

between 0 and 9 attempts.

Sets the Duration of the lockout,

between 00 and 99, the value is

multiplied by ten, resulting in

4 ? ? ?

0-990

seconds