Instruction manual

Programming
4.2 CHANGING THE OPEN CODE
The open code is mainly used as a method to quickly test the
Lock Strike relay during installation.
The factory 4-digit default setting for the open code is 2580.
For security reasons when the first user is added to the controller or
the auxiliary code is changed, the default open code will
automatically be deleted, non-default codes will not be erased
automatically.
Note:
• Open code does not function in secure mode.
• Wrong entries: you will hear a long beep and the controller will
return to its normal mode.
• Code 0000 will erase and deactivate the open code.
1) Enter the programming mod
2)
e.
Depress 1 to enter Menu 1.
• The Mode indicator will turn red.
Mode
Door
Red Green
3) Enter the new code you wish to set
4) ys ode.
as open code.
S tem returns to its normal m
• You will hear three beeps.
• The Door indicator will turn off.
• The Mode indicator will turn green.
Mode
Door
Green
4.3 CHANGING THE AUXILIARY CODE
The auxiliary code is mainly used as a method to quickly test the
Auxiliary relay during installation. The default 4-Digit factory setting
for the auxiliary code is 0852.
For security reasons when the first user is added to the controller or
the open code is changed, the default auxiliary code will
automatically be deleted, non-default codes will not be erased
automatically.
Page 29 AC-Q4x Family, Installation and user Manual