Instruction manual

Operation
AC-Q4x Family, Installation and user Manual Page 23
3.3.4 From Bypass to Normal Mode
1) e
SPECIAL OPERATIONAL FEATURES
inst cised, as required by
s 4
bility in different applications, the controller’s
uxiliary input and output can be configured in ten different
s o Auxiliary Mode, on
rap
he
tton is used to open the door.
e function of the REX pushbutton depends on the Lock Strike
Ent r the normal / bypass code.
• Mode indicator will flash green.
2) Depress the # key to confirm the mode change.
• Mode indicator will turn green.
3.4
Some allation-specific features are exer
the system. These features are implemented as shown in Figure
thru 9.
3.4.1 Auxiliary Input & Output
For optimum usa
a
mode f operation. Refer to Setting the
parag h 4.8.
3.4.2 Request to Exit Button (REX)
The REX pushbutton is located within the premises and is used to
open the door from the inside. It is usually located in a convenient
location (e.g.: next to the door or at a receptionist’s desk). The
door chime (if enabled) in the BL-D40 does not sound when t
REX pushbu
Th
relay, whether it is programmed for failsafe or for fail secure
operation.
Mode
Door
Orange
Mode
Door
Green
Green
Mode
Door